Electra OU10-47T ST Instrukcja Obsługi Pobierz pdf (Strona 41)

CONTROL SYSTEM

11-6

SM SAFRPM 1-A.0 GB

11.11.2 Positioning

The vane is once pressed to the cane stopper below to confirm the standard position and then set to

the desired angle. The positioning is decided as follows:

a. When the ON/OFF button is pressed.

b. When the vane control is change from AUTO to MANUAL.

c. When the SWING is finished.

d. When the test run starts.

e. When the power supply turns ON.

11.11.3 The auto vane changes as follows by pressing the VANE CONTROL button.

11.11.4 VANE AUTO mode

In vane auto mode, the microprocessor automatically determines the vane angle and operation

to make the optimum room-temperature distribution.

11.11.5 SWING mode

When presses the SWING button, the vane swings.

11.12 TIMER Operation

11.12.1 To activate the air conditioner at the desire time,

follow the procedure specified below(the remote control and air conditioner are switched off):

a. Press the TIMER button

b. Select the desired mode by pressing the mode button.

c. Select the desired temperature by pressing the UP/DOWN button (only possible when the ‘cool’

or ‘heat’ mode is selected).

d. Select the ventilator speed (low, medium or high) or automatic mode (only possible

when the feel, COOL or HEAT mode is selected) by pressing the Fan button. The ventilator always

operates in the auto mode when the dry mode is selected.

e. Select swing or no swing by pressing the SWING button

f. Press the TIMER button (‘h’ flashes ).

g. Use the UP/DOWN button to select the time at which the air conditioner must activate

(between 0 and 10 hours can be set at every half hour-between 10 and 24 hours can be set at every

hour).

h. Press the TIME button (‘h’ stops flashing) and the preset time appears in the display.

i. Press the TIME button again to delete the selected data from the memory.

Note: if no buttons are pressed during the programming of the timer function, thee remote control will

switch off automatically after 10 seconds.

11.12.2 To switch the air conditioner off at the desired time,

follow the procedure specified below (the remote control and air conditioner are switched off):

a. Press the timer button.

b. Use the UP/DOWN button to select the time at witch.

11.13 Emergency Operation

When the EMERGENCY operation switch is pressed once, COOLING mode is selected and if in

3 seconds the emergency operation switch is pressed again, mode is selected. Then pressed once

again, the unit is switch off.

When the remote controller is missing, has failed or the batteries run down, press the EMERGENCY

operation switch on the front of the indoor unit. The unit will start. The first 30 minutes of operation

will be the test run operation. The operation is for servicing. The indoor fan runs at high speed and

the system is in continuous operation.

CONTENTS

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 54 55

Komentarze do niniejszej Instrukcji

Brak uwag

Electra OU10-47T ST Instrukcja Obsługi Strona 41

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Klimatyzatory typu split Electra OU10-47T ST